The similar appearance, the different specification, give you best choice

The appearance of Sanxing FD5 Linear Actuator and FD5-DW Linear Actuator are similar, but the parameters of the two products are s little different, and the biggest differences is that the FD5-DW has a Potentiometer, which can feedback the stroke position exactly. The potentiometer is a variable resistor. It is usually composed of a resistor and a rotating or sliding system, i.e. a moving contact moves over the resistor to obtain a partial voltage output.

The function of the potentiometer – to regulate the voltage (including DC voltage and signal voltage) and the current.

 

 About the specific parameter differences between the two products, please find as follows:

FD5

  • l Input Voltage: 12V / 24VDC
  • Max. Load: 1500N ( Push ) / 1200N ( Pull )
  • Speed ( No Load): 5 ~ 35mm/s
  • Stroke ( S ): 25 ~ 1000mm
  • Min. Installation Distance ( A ): Stroke + 105mm
  • Duty Cycle: 15%, stop for 17 minutes after continuously working 3 minutes
  • Limit Switches: Built-in, factory preset
  • Operation Temperature: -25°C~ +65°C
  • Protection Class: IP54
  • Rear Connector: No rotation
  • Color: Black / Sliver

HH3A7056_副本

 

FD5-DW

  • Input Voltage: 12V / 24VDC
  • Max. Load: 900N ( Push ) / 750N ( Pull )
  • Speed ( No Load): 5 ~ 40mm/s
  • Stroke ( S ): 30 ~ 1000mm
  • Min. Installation Distance ( A ): Stroke + 140mm
  • Duty Cycle: 10%, stop for 18 minutes after continuously working 2 minutes
  • Limit Switches: Built-in, factory preset
  • Operation Temperature: -25°C~ +65°C
  • Protection Class: IP54
  • Rear Connector: No rotation
  • Color: Sliver

 

HH3A7060_副本

 

Application

The two models are similar in their applications, mostly in door and window angle adjustments, cabinet lifts, car trunks, solar tracking systems and some industrial applications

The motor drives the small wire rod mounted on the inner tube by decelerating the gear, drives the axial running nut connected to it, and the nut tentacles press the limit switch to disconnect the power supply when the stroke is set, and the motor stops moving (the reverse is the same). Potentiometer function is optional- the FD5-DW linear actuator, to show the travel status of the actuator operation。

LD]LH6SQGTAV9F)51WJ9)Y5_副本


Post time: Sep-04-2021